系泰機電有限公司 -www.accusystech.com

VT-6A 指針型真空顯示器 (真空計、真空感測器、真空儀器)

2011-08-09T01:40:00.000-07:00

VT-6 Series

真空範圍: 0.001 Torr - 1 Torr (1 - 1,000 m Torr)

型錄下載: http://www.teledyne-hi.com/pdfs/PB-182%20rev-1008_Digital%20CVT%20&%20VT.pdf

使用者手冊: http://www.teledyne-hi.com/Manual/Vacuum/162-Digital_VT_Manual.pdf

Specifications	Models VT-6A Series Analog Gauges	Model VT-6 Series Digital Gauge	Model Digital CVT-6	Model Digital AVC DAVC-6	Model HPM 4/6 Battery Hand held

View Product Bulletins for Ordering Codes	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page
Manuals	VT-6A	Digital VT	Digital CVT	Digital AVC	HPM 4/6
Drawings	VT-6B	-	-	-	-
Thermocouple Sensor	DV-6	DV-6 (also uses DV-4)	DV-6 (also uses DV-4)	DV-6 Also uses DV-4 or DV-5	DV-6 (also uses DV-4)
Reference Tube for calibrating Meter	DB-20	DB-20	DB-20	DB-20	DB-20
Vacuum Range	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	1 mTorr - 999 mTorr	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)
Display	Reverse motion analog needle	3 digit LED	3 Digit LED	No display	3 1/2 Digit LCD
Units	Torr (STD) mbar Pa	mTorr Note: When using DV-4 will display Torr	Torr (STD) mbar	-	Torr (STD) mbar
Model Number	(Choose below)	Digital VT	Digital CVT	DAVC-6	HPM 4/6
Panel Mount	Model VT-6A	Digital VT	-	-	-
Panel Cutout Size	W- 5.0" H- 4.19" D- 3.75"	1/8" DIN W- 3.62" H- 1.77"	1/8" DIN W- 3.62" H- 1.77"	-	-
Enclosed Box (Cabinet) with on/off Switch	Model VT-6B	-	-	-	-
Output	Model VT-6A 0-1 Volt	-	-	0-1 Volt	-
2 Control Points	Model CVT-26 Relay 5 amps SPDT @250 VAC	-	-	-	-
Enclosed Box (Cabinet) with 2 Positions	Model VT-6S2	-	-	-	-
Enclosed Box (Cabinet) with 5 Positions	Model VT-6S5 Note:cables not included on this model	-	-	-	-
Circuit, Can, Cable only	Model VT-6D	-	-	-	-
Electrical Noise Immunity	-	ENC 61010 Class A and IEC 61326-1:Section 6.2 Complies with IEC 61010-1	-	-	-
Power	115 VAC (50-60 Hz) 220 VAC 100 VAC (Japan)	100-240 VAC-50- 60 Hz, 0.25 amps 4.5-5.3 VDC -155mA	90 - 250 VAC-50- 60 Hz, X.XX amps or 24 VDC	+12 - +30 VDC @.7 watt	9 volt battery
Power Cable Length	6 feet	6 feet	-	-	-
Vacuum sensor Length	8 feet (others available)	8 feet (others available)	-	Not needed	13" (coiled length)
Weight (approx)	2-5 lbs (0.9-2.5 kg) dependent on model	7 oz (0.2 kg)	7 oz (0.2 kg)	22 oz (624 grams )	1.8 lbs (0.8 kg)

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

VT-6 真空數位型顯示器 (真空計、真空感測器、真空儀器)

2011-08-09T01:39:00.000-07:00

VT-6 Series

真空範圍: 0.001 Torr - 1 Torr (1 - 1,000 m Torr)

型錄下載: http://www.teledyne-hi.com/pdfs/PB-101_VT_CVT.pdf

使用者手冊: http://www.teledyne-hi.com/Manual/Vacuum/146-VT_CVT_Manual.pdf

Specifications	Models VT-6A Series Analog Gauges	Model VT-6 Series Digital Gauge	Model Digital CVT-6	Model Digital AVC DAVC-6	Model HPM 4/6 Battery Hand held

View Product Bulletins for Ordering Codes	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page
Manuals	VT-6A	Digital VT	Digital CVT	Digital AVC	HPM 4/6
Drawings	VT-6B	-	-	-	-
Thermocouple Sensor	DV-6	DV-6 (also uses DV-4)	DV-6 (also uses DV-4)	DV-6 Also uses DV-4 or DV-5	DV-6 (also uses DV-4)
Reference Tube for calibrating Meter	DB-20	DB-20	DB-20	DB-20	DB-20
Vacuum Range	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	1 mTorr - 999 mTorr	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)
Display	Reverse motion analog needle	3 digit LED	3 Digit LED	No display	3 1/2 Digit LCD
Units	Torr (STD) mbar Pa	mTorr Note: When using DV-4 will display Torr	Torr (STD) mbar	-	Torr (STD) mbar
Model Number	(Choose below)	Digital VT	Digital CVT	DAVC-6	HPM 4/6
Panel Mount	Model VT-6A	Digital VT	-	-	-
Panel Cutout Size	W- 5.0" H- 4.19" D- 3.75"	1/8" DIN W- 3.62" H- 1.77"	1/8" DIN W- 3.62" H- 1.77"	-	-
Enclosed Box (Cabinet) with on/off Switch	Model VT-6B	-	-	-	-
Output	Model VT-6A 0-1 Volt	-	-	0-1 Volt	-
2 Control Points	Model CVT-26 Relay 5 amps SPDT @250 VAC	-	-	-	-
Enclosed Box (Cabinet) with 2 Positions	Model VT-6S2	-	-	-	-
Enclosed Box (Cabinet) with 5 Positions	Model VT-6S5 Note:cables not included on this model	-	-	-	-
Circuit, Can, Cable only	Model VT-6D	-	-	-	-
Electrical Noise Immunity	-	ENC 61010 Class A and IEC 61326-1:Section 6.2 Complies with IEC 61010-1	-	-	-
Power	115 VAC (50-60 Hz) 220 VAC 100 VAC (Japan)	100-240 VAC-50- 60 Hz, 0.25 amps 4.5-5.3 VDC -155mA	90 - 250 VAC-50- 60 Hz, X.XX amps or 24 VDC	+12 - +30 VDC @.7 watt	9 volt battery
Power Cable Length	6 feet	6 feet	-	-	-
Vacuum sensor Length	8 feet (others available)	8 feet (others available)	-	Not needed	13" (coiled length)
Weight (approx)	2-5 lbs (0.9-2.5 kg) dependent on model	7 oz (0.2 kg)	7 oz (0.2 kg)	22 oz (624 grams )	1.8 lbs (0.8 kg)

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

Digital CVT-6 真空數位型顯示器 (真空計、真空感測器、真空儀器)

2011-08-09T01:38:00.000-07:00

VT-6 Series

真空範圍: 0.001 Torr - 1 Torr (1 - 1,000 m Torr)

型錄下載: http://www.teledyne-hi.com/pdfs/PB-182%20rev-1008_Digital%20CVT%20&%20VT.pdf

使用者手冊: http://www.teledyne-hi.com/Manual/Vacuum/173-Digital_CVT_Manual.pdf

Specifications	Models VT-6A Series Analog Gauges	Model VT-6 Series Digital Gauge	Model Digital CVT-6	Model Digital AVC DAVC-6	Model HPM 4/6 Battery Hand held

View Product Bulletins for Ordering Codes	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page
Manuals	VT-6A	Digital VT	Digital CVT	Digital AVC	HPM 4/6
Drawings	VT-6B	-	-	-	-
Thermocouple Sensor	DV-6	DV-6 (also uses DV-4)	DV-6 (also uses DV-4)	DV-6 Also uses DV-4 or DV-5	DV-6 (also uses DV-4)
Reference Tube for calibrating Meter	DB-20	DB-20	DB-20	DB-20	DB-20
Vacuum Range	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	1 mTorr - 999 mTorr	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)
Display	Reverse motion analog needle	3 digit LED	3 Digit LED	No display	3 1/2 Digit LCD
Units	Torr (STD) mbar Pa	mTorr Note: When using DV-4 will display Torr	Torr (STD) mbar	-	Torr (STD) mbar
Model Number	(Choose below)	Digital VT	Digital CVT	DAVC-6	HPM 4/6
Panel Mount	Model VT-6A	Digital VT	-	-	-
Panel Cutout Size	W- 5.0" H- 4.19" D- 3.75"	1/8" DIN W- 3.62" H- 1.77"	1/8" DIN W- 3.62" H- 1.77"	-	-
Enclosed Box (Cabinet) with on/off Switch	Model VT-6B	-	-	-	-
Output	Model VT-6A 0-1 Volt	-	-	0-1 Volt	-
2 Control Points	Model CVT-26 Relay 5 amps SPDT @250 VAC	-	-	-	-
Enclosed Box (Cabinet) with 2 Positions	Model VT-6S2	-	-	-	-
Enclosed Box (Cabinet) with 5 Positions	Model VT-6S5 Note:cables not included on this model	-	-	-	-
Circuit, Can, Cable only	Model VT-6D	-	-	-	-
Electrical Noise Immunity	-	ENC 61010 Class A and IEC 61326-1:Section 6.2 Complies with IEC 61010-1	-	-	-
Power	115 VAC (50-60 Hz) 220 VAC 100 VAC (Japan)	100-240 VAC-50- 60 Hz, 0.25 amps 4.5-5.3 VDC -155mA	90 - 250 VAC-50- 60 Hz, X.XX amps or 24 VDC	+12 - +30 VDC @.7 watt	9 volt battery
Power Cable Length	6 feet	6 feet	-	-	-
Vacuum sensor Length	8 feet (others available)	8 feet (others available)	-	Not needed	13" (coiled length)
Weight (approx)	2-5 lbs (0.9-2.5 kg) dependent on model	7 oz (0.2 kg)	7 oz (0.2 kg)	22 oz (624 grams )	1.8 lbs (0.8 kg)

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

Digital AVC DAVC-6 真空傳感器

2011-08-09T01:37:00.000-07:00

VT-6 Series

真空範圍: 0.001 Torr - 1 Torr (1 - 1,000 m Torr)

型錄下載: http://www.teledyne-hi.com/pdfs/PB-183_Digital_AVC.pdf

使用者手冊: http://www.teledyne-hi.com/Manual/Vacuum/174-DigitalAVC_Manual.pdf

Specifications	Models VT-6A Series Analog Gauges	Model VT-6 Series Digital Gauge	Model Digital CVT-6	Model Digital AVC DAVC-6	Model HPM 4/6 Battery Hand held

View Product Bulletins for Ordering Codes	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page
Manuals	VT-6A	Digital VT	Digital CVT	Digital AVC	HPM 4/6
Drawings	VT-6B	-	-	-	-
Thermocouple Sensor	DV-6	DV-6 (also uses DV-4)	DV-6 (also uses DV-4)	DV-6 Also uses DV-4 or DV-5	DV-6 (also uses DV-4)
Reference Tube for calibrating Meter	DB-20	DB-20	DB-20	DB-20	DB-20
Vacuum Range	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	1 mTorr - 999 mTorr	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)
Display	Reverse motion analog needle	3 digit LED	3 Digit LED	No display	3 1/2 Digit LCD
Units	Torr (STD) mbar Pa	mTorr Note: When using DV-4 will display Torr	Torr (STD) mbar	-	Torr (STD) mbar
Model Number	(Choose below)	Digital VT	Digital CVT	DAVC-6	HPM 4/6
Panel Mount	Model VT-6A	Digital VT	-	-	-
Panel Cutout Size	W- 5.0" H- 4.19" D- 3.75"	1/8" DIN W- 3.62" H- 1.77"	1/8" DIN W- 3.62" H- 1.77"	-	-
Enclosed Box (Cabinet) with on/off Switch	Model VT-6B	-	-	-	-
Output	Model VT-6A 0-1 Volt	-	-	0-1 Volt	-
2 Control Points	Model CVT-26 Relay 5 amps SPDT @250 VAC	-	-	-	-
Enclosed Box (Cabinet) with 2 Positions	Model VT-6S2	-	-	-	-
Enclosed Box (Cabinet) with 5 Positions	Model VT-6S5 Note:cables not included on this model	-	-	-	-
Circuit, Can, Cable only	Model VT-6D	-	-	-	-
Electrical Noise Immunity	-	ENC 61010 Class A and IEC 61326-1:Section 6.2 Complies with IEC 61010-1	-	-	-
Power	115 VAC (50-60 Hz) 220 VAC 100 VAC (Japan)	100-240 VAC-50- 60 Hz, 0.25 amps 4.5-5.3 VDC -155mA	90 - 250 VAC-50- 60 Hz, X.XX amps or 24 VDC	+12 - +30 VDC @.7 watt	9 volt battery
Power Cable Length	6 feet	6 feet	-	-	-
Vacuum sensor Length	8 feet (others available)	8 feet (others available)	-	Not needed	13" (coiled length)
Weight (approx)	2-5 lbs (0.9-2.5 kg) dependent on model	7 oz (0.2 kg)	7 oz (0.2 kg)	22 oz (624 grams )	1.8 lbs (0.8 kg)

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

HPM 4/6 Battery Hand held 手持式顯示器(DV-6)、真空計、真空感測器、真空儀器

2011-08-09T01:34:00.000-07:00

VT-6 Series

真空範圍: 0.001 Torr - 1 Torr (1 - 1,000 m Torr)

型錄下載: http://www.teledyne-hi.com/pdfs/PB-136%20rev-0405_HPM%204-6.pdf

使用者手冊: http://www.teledyne-hi.com/Manual/Vacuum/153-HPM4_6_Manual.pdf

Specifications	Models VT-6A Series Analog Gauges	Model VT-6 Series Digital Gauge	Model Digital CVT-6	Model Digital AVC DAVC-6	Model HPM 4/6 Battery Hand held

View Product Bulletins for Ordering Codes	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page
Manuals	VT-6A	Digital VT	Digital CVT	Digital AVC	HPM 4/6
Drawings	VT-6B	-	-	-	-
Thermocouple Sensor	DV-6	DV-6 (also uses DV-4)	DV-6 (also uses DV-4)	DV-6 Also uses DV-4 or DV-5	DV-6 (also uses DV-4)
Reference Tube for calibrating Meter	DB-20	DB-20	DB-20	DB-20	DB-20
Vacuum Range	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)	1 mTorr - 999 mTorr	0.001 - 1 Torr (1 mTorr - 1,000 mTorr)
Display	Reverse motion analog needle	3 digit LED	3 Digit LED	No display	3 1/2 Digit LCD
Units	Torr (STD) mbar Pa	mTorr Note: When using DV-4 will display Torr	Torr (STD) mbar	-	Torr (STD) mbar
Model Number	(Choose below)	Digital VT	Digital CVT	DAVC-6	HPM 4/6
Panel Mount	Model VT-6A	Digital VT	-	-	-
Panel Cutout Size	W- 5.0" H- 4.19" D- 3.75"	1/8" DIN W- 3.62" H- 1.77"	1/8" DIN W- 3.62" H- 1.77"	-	-
Enclosed Box (Cabinet) with on/off Switch	Model VT-6B	-	-	-	-
Output	Model VT-6A 0-1 Volt	-	-	0-1 Volt	-
2 Control Points	Model CVT-26 Relay 5 amps SPDT @250 VAC	-	-	-	-
Enclosed Box (Cabinet) with 2 Positions	Model VT-6S2	-	-	-	-
Enclosed Box (Cabinet) with 5 Positions	Model VT-6S5 Note:cables not included on this model	-	-	-	-
Circuit, Can, Cable only	Model VT-6D	-	-	-	-
Electrical Noise Immunity	-	ENC 61010 Class A and IEC 61326-1:Section 6.2 Complies with IEC 61010-1	-	-	-
Power	115 VAC (50-60 Hz) 220 VAC 100 VAC (Japan)	100-240 VAC-50- 60 Hz, 0.25 amps 4.5-5.3 VDC -155mA	90 - 250 VAC-50- 60 Hz, X.XX amps or 24 VDC	+12 - +30 VDC @.7 watt	9 volt battery
Power Cable Length	6 feet	6 feet	-	-	-
Vacuum sensor Length	8 feet (others available)	8 feet (others available)	-	Not needed	13" (coiled length)
Weight (approx)	2-5 lbs (0.9-2.5 kg) dependent on model	7 oz (0.2 kg)	7 oz (0.2 kg)	22 oz (624 grams )	1.8 lbs (0.8 kg)

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

HPM 4/6 Battery Hand held 手持式顯示器、真空計、真空感測器、真空儀器

2011-08-09T01:33:00.000-07:00

VT-4 Series

真空範圍: 0.1 Torr - 20 Torr (100 - 20,000 m Torr)

型錄下載: http://www.teledyne-hi.com/pdfs/PB-136%20rev-0405_HPM%204-6.pdf

使用者手冊: http://www.teledyne-hi.com/Manual/Vacuum/153-HPM4_6_Manual.pdf

Vacuum Measurement with VT-4 Series Instruments using DV - 4 Vacuum Sensors

Specifications	Models VT-4A Series Analog Gauges	Model VT-4 Series Digital Gauge	Model Digital CVT-4	Model Digital AVC DAVC-4	Model HPM 4/6 Battery Hand held

View Product Bulletins for Ordering Codes	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page
Manuals	VT-4A	Digital VT	Digital CVT	Digital AVC	HPM 4/6
Drawings	VT-4B	-	-	-	-
Thermocouple Sensor	DV-4	DV-4 Also uses DV-6	DV-4 Also uses DV-6	DV-4 Also uses DV-5 or DV-6	DV-4 Also uses DV-6
Reference Tube for Calibrating Meter	DB-16D	DB-16D	DB-16D	DB-16D	DB-16D
Vacuum Range	0.1 - 20 Torr (100-20,000 mTorr)	0.02 - 20 Torr (20-20,000 mTorr)	0.02 - 20 Torr (20 - 20,000 mTorr)	0.02 - 20 Torr	0.1 - 20 Torr (100-20,000 mTorr)
Display	Reverse motion analog needle	3 digit LED	3 Digit LED	No display	3 1/2 Digit LCD
Units	Torr mbar Pa	Torr	Torr mbar Pa	-	Torr mbar
Model Number	(Choose below)	DVT-4	DCVT-4	DAVC-4	HPM 4/6
Panel Mount	Model VT-4A	Digital VT	-	-	-
Panel Cutout Size	W- 5.0" H- 4.19" D- 3.75"	1/8" DIN W- 3.62" H- 1.77"	1/8" DIN W- 3.62" H- 1.77"	-	-
Enclosed Box (Cabinet) with on/off Switch	Model VT-4B	-	-	-	-
Output	Model VT-4A 0-1 Volt	-	-	0-1 Volt	-
2 Control Points	Model CVT-24A Relay 5 amps SPDT @250 VAC	-	-	-	-
Enclosed Box (Cabinet) with 2 Positions	Model VT-4S2	-	-	-	-
Enclosed Box (Cabinet) with 5 Positions	Model VT-4S5 Note:cables not included on this model	-	-	-	-
Circuit, Can, Cable only	Model VT-4D	-	-	-	-
Electrical Noise Immunity	-	ENC 61010 Class A and IEC 61326-1:Section 6.2 Complies with IEC 61010-1	-	-	-
Power	115 VAC (50-60 Hz) 220 VAC 100 VAC (Japan)	100-240 VAC-50-60 Hz, 0.25 amps 4.5-5.3 VDC -155mA	90 - 250 VAC-50-60 Hz, X.XX amps or 24 VDC	+12 - +30 VDC @.7 watt	9 volt battery
Power Cable Length	6 feet	6 feet	-	-	-
Vacuum sensor Cable Length	8 feet (others available)	8 feet (others available)	-	Not needed	13" (coiled length)
Weight (approx)	2-5 lbs (0.9-2.5 kg) dependent on model	7 oz (0.2 kg)	7 oz (0.2 kg)	22 oz (624 grams )	1.8 lbs (0.8 kg)

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

Digital AVC DAVC-4 真空傳感器

2011-08-09T01:31:00.000-07:00

VT-4 Series

真空範圍: 0.1 Torr - 20 Torr (100 - 20,000 m Torr)

型錄下載: http://www.teledyne-hi.com/pdfs/PB-183_Digital_AVC.pdf

使用者手冊: http://www.teledyne-hi.com/Manual/Vacuum/174-062010_Digital_AVC.pdf

Vacuum Measurement with VT-4 Series Instruments using DV - 4 Vacuum Sensors

Specifications	Models VT-4A Series Analog Gauges	Model VT-4 Series Digital Gauge	Model Digital CVT-4	Model Digital AVC DAVC-4	Model HPM 4/6 Battery Hand held

View Product Bulletins for Ordering Codes	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page
Manuals	VT-4A	Digital VT	Digital CVT	Digital AVC	HPM 4/6
Drawings	VT-4B	-	-	-	-
Thermocouple Sensor	DV-4	DV-4 Also uses DV-6	DV-4 Also uses DV-6	DV-4 Also uses DV-5 or DV-6	DV-4 Also uses DV-6
Reference Tube for Calibrating Meter	DB-16D	DB-16D	DB-16D	DB-16D	DB-16D
Vacuum Range	0.1 - 20 Torr (100-20,000 mTorr)	0.02 - 20 Torr (20-20,000 mTorr)	0.02 - 20 Torr (20 - 20,000 mTorr)	0.02 - 20 Torr	0.1 - 20 Torr (100-20,000 mTorr)
Display	Reverse motion analog needle	3 digit LED	3 Digit LED	No display	3 1/2 Digit LCD
Units	Torr mbar Pa	Torr	Torr mbar Pa	-	Torr mbar
Model Number	(Choose below)	DVT-4	DCVT-4	DAVC-4	HPM 4/6
Panel Mount	Model VT-4A	Digital VT	-	-	-
Panel Cutout Size	W- 5.0" H- 4.19" D- 3.75"	1/8" DIN W- 3.62" H- 1.77"	1/8" DIN W- 3.62" H- 1.77"	-	-
Enclosed Box (Cabinet) with on/off Switch	Model VT-4B	-	-	-	-
Output	Model VT-4A 0-1 Volt	-	-	0-1 Volt	-
2 Control Points	Model CVT-24A Relay 5 amps SPDT @250 VAC	-	-	-	-
Enclosed Box (Cabinet) with 2 Positions	Model VT-4S2	-	-	-	-
Enclosed Box (Cabinet) with 5 Positions	Model VT-4S5 Note:cables not included on this model	-	-	-	-
Circuit, Can, Cable only	Model VT-4D	-	-	-	-
Electrical Noise Immunity	-	ENC 61010 Class A and IEC 61326-1:Section 6.2 Complies with IEC 61010-1	-	-	-
Power	115 VAC (50-60 Hz) 220 VAC 100 VAC (Japan)	100-240 VAC-50-60 Hz, 0.25 amps 4.5-5.3 VDC -155mA	90 - 250 VAC-50-60 Hz, X.XX amps or 24 VDC	+12 - +30 VDC @.7 watt	9 volt battery
Power Cable Length	6 feet	6 feet	-	-	-
Vacuum sensor Cable Length	8 feet (others available)	8 feet (others available)	-	Not needed	13" (coiled length)
Weight (approx)	2-5 lbs (0.9-2.5 kg) dependent on model	7 oz (0.2 kg)	7 oz (0.2 kg)	22 oz (624 grams )	1.8 lbs (0.8 kg)

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

Digital CVT-4 真空顯示器

2011-08-09T01:30:00.000-07:00

VT-4 Series

真空範圍: 0.1 Torr - 20 Torr (100 - 20,000 m Torr)

型錄下載: http://www.teledyne-hi.com/pdfs/PB-182%20rev-1008_Digital%20CVT%20&%20VT.pdf

使用者手冊: http://www.teledyne-hi.com/Manual/Vacuum/173-Digital_CVT_Manual.pdf

Vacuum Measurement with VT-4 Series Instruments using DV - 4 Vacuum Sensors

Specifications	Models VT-4A Series Analog Gauges	Model VT-4 Series Digital Gauge	Model Digital CVT-4	Model Digital AVC DAVC-4	Model HPM 4/6 Battery Hand held

View Product Bulletins for Ordering Codes	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page
Manuals	VT-4A	Digital VT	Digital CVT	Digital AVC	HPM 4/6
Drawings	VT-4B	-	-	-	-
Thermocouple Sensor	DV-4	DV-4 Also uses DV-6	DV-4 Also uses DV-6	DV-4 Also uses DV-5 or DV-6	DV-4 Also uses DV-6
Reference Tube for Calibrating Meter	DB-16D	DB-16D	DB-16D	DB-16D	DB-16D
Vacuum Range	0.1 - 20 Torr (100-20,000 mTorr)	0.02 - 20 Torr (20-20,000 mTorr)	0.02 - 20 Torr (20 - 20,000 mTorr)	0.02 - 20 Torr	0.1 - 20 Torr (100-20,000 mTorr)
Display	Reverse motion analog needle	3 digit LED	3 Digit LED	No display	3 1/2 Digit LCD
Units	Torr mbar Pa	Torr	Torr mbar Pa	-	Torr mbar
Model Number	(Choose below)	DVT-4	DCVT-4	DAVC-4	HPM 4/6
Panel Mount	Model VT-4A	Digital VT	-	-	-
Panel Cutout Size	W- 5.0" H- 4.19" D- 3.75"	1/8" DIN W- 3.62" H- 1.77"	1/8" DIN W- 3.62" H- 1.77"	-	-
Enclosed Box (Cabinet) with on/off Switch	Model VT-4B	-	-	-	-
Output	Model VT-4A 0-1 Volt	-	-	0-1 Volt	-
2 Control Points	Model CVT-24A Relay 5 amps SPDT @250 VAC	-	-	-	-
Enclosed Box (Cabinet) with 2 Positions	Model VT-4S2	-	-	-	-
Enclosed Box (Cabinet) with 5 Positions	Model VT-4S5 Note:cables not included on this model	-	-	-	-
Circuit, Can, Cable only	Model VT-4D	-	-	-	-
Electrical Noise Immunity	-	ENC 61010 Class A and IEC 61326-1:Section 6.2 Complies with IEC 61010-1	-	-	-
Power	115 VAC (50-60 Hz) 220 VAC 100 VAC (Japan)	100-240 VAC-50-60 Hz, 0.25 amps 4.5-5.3 VDC -155mA	90 - 250 VAC-50-60 Hz, X.XX amps or 24 VDC	+12 - +30 VDC @.7 watt	9 volt battery
Power Cable Length	6 feet	6 feet	-	-	-
Vacuum sensor Cable Length	8 feet (others available)	8 feet (others available)	-	Not needed	13" (coiled length)
Weight (approx)	2-5 lbs (0.9-2.5 kg) dependent on model	7 oz (0.2 kg)	7 oz (0.2 kg)	22 oz (624 grams )	1.8 lbs (0.8 kg)

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

Digital VT 真空顯示器 (真空計、真空感測器、真空儀器)

2011-08-09T01:27:00.000-07:00

VT-4 Series

真空範圍: 0.1 Torr - 20 Torr (100 - 20,000 m Torr)

型錄下載: http://www.teledyne-hi.com/pdfs/PB-182%20rev-1008_Digital%20CVT%20&%20VT.pdf

使用者手冊: http://www.teledyne-hi.com/Manual/Vacuum/162-Digital_VT_Manual.pdf

Vacuum Measurement with VT-4 Series Instruments using DV - 4 Vacuum Sensors

Specifications	Models VT-4A Series Analog Gauges	Model VT-4 Series Digital Gauge	Model Digital CVT-4	Model Digital AVC DAVC-4	Model HPM 4/6 Battery Hand held

View Product Bulletins for Ordering Codes	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page
Manuals	VT-4A	Digital VT	Digital CVT	Digital AVC	HPM 4/6
Drawings	VT-4B	-	-	-	-
Thermocouple Sensor	DV-4	DV-4 Also uses DV-6	DV-4 Also uses DV-6	DV-4 Also uses DV-5 or DV-6	DV-4 Also uses DV-6
Reference Tube for Calibrating Meter	DB-16D	DB-16D	DB-16D	DB-16D	DB-16D
Vacuum Range	0.1 - 20 Torr (100-20,000 mTorr)	0.02 - 20 Torr (20-20,000 mTorr)	0.02 - 20 Torr (20 - 20,000 mTorr)	0.02 - 20 Torr	0.1 - 20 Torr (100-20,000 mTorr)
Display	Reverse motion analog needle	3 digit LED	3 Digit LED	No display	3 1/2 Digit LCD
Units	Torr mbar Pa	Torr	Torr mbar Pa	-	Torr mbar
Model Number	(Choose below)	DVT-4	DCVT-4	DAVC-4	HPM 4/6
Panel Mount	Model VT-4A	Digital VT	-	-	-
Panel Cutout Size	W- 5.0" H- 4.19" D- 3.75"	1/8" DIN W- 3.62" H- 1.77"	1/8" DIN W- 3.62" H- 1.77"	-	-
Enclosed Box (Cabinet) with on/off Switch	Model VT-4B	-	-	-	-
Output	Model VT-4A 0-1 Volt	-	-	0-1 Volt	-
2 Control Points	Model CVT-24A Relay 5 amps SPDT @250 VAC	-	-	-	-
Enclosed Box (Cabinet) with 2 Positions	Model VT-4S2	-	-	-	-
Enclosed Box (Cabinet) with 5 Positions	Model VT-4S5 Note:cables not included on this model	-	-	-	-
Circuit, Can, Cable only	Model VT-4D	-	-	-	-
Electrical Noise Immunity	-	ENC 61010 Class A and IEC 61326-1:Section 6.2 Complies with IEC 61010-1	-	-	-
Power	115 VAC (50-60 Hz) 220 VAC 100 VAC (Japan)	100-240 VAC-50-60 Hz, 0.25 amps 4.5-5.3 VDC -155mA	90 - 250 VAC-50-60 Hz, X.XX amps or 24 VDC	+12 - +30 VDC @.7 watt	9 volt battery
Power Cable Length	6 feet	6 feet	-	-	-
Vacuum sensor Cable Length	8 feet (others available)	8 feet (others available)	-	Not needed	13" (coiled length)
Weight (approx)	2-5 lbs (0.9-2.5 kg) dependent on model	7 oz (0.2 kg)	7 oz (0.2 kg)	22 oz (624 grams )	1.8 lbs (0.8 kg)

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-34 vacuum sensor 真空感測管

2011-08-09T01:17:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: Stainless (high temp/pressure)

• 0.01 - 20 Torr (100 - 20,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-34 Thermocouple vacuum gauge tubes

建議搭配儀器:

Digital VT-4

Digital CVT

VT-4A

HPM 4/6

Digital-

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-4D-KF-25 vacuum sensor 真空感測管 (真空計、真空感測器、真空儀器)

2011-08-09T01:16:00.002-07:00

Thermocouple vacuum sensor :

• Fitting: KF-25

• 0.01 - 20 Torr (100 - 20,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-4D-KF-25 Thermocouple vacuum gauge tubes

建議搭配儀器:

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-4D-KF-16 vacuum sensor 真空感測管 (真空計、真空感測器、真空儀器)

2011-08-09T01:16:00.001-07:00

Thermocouple vacuum sensor :

• Fitting: KF-16

• 0.01 - 20 Torr (100 - 20,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-4D-KF-16 Thermocouple vacuum gauge tubes

建議搭配儀器:

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-4D-VCR vacuum sensor 真空感測管 (真空計、真空感測器、真空儀器)

2011-08-09T01:15:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: VCR

• 0.01 - 20 Torr (100 - 20,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-4D-VCR Thermocouple vacuum gauge tubes

建議搭配儀器:

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-4R vacuum sensor 真空感測管 (真空計、真空感測器、真空儀器)

2011-08-09T01:13:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: 1/8" NPT -Ruggedized

• 0.01 - 20 Torr (100 - 20,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-4R Thermocouple vacuum gauge tubes

建議搭配儀器:

Email us: sales@accusystech.com

Website: http://www.accusystech.com/

DV-4D vacuum sensor 真空感測管 (真空計、真空感測器、真空儀器)

2011-08-09T00:36:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: 1/8" NPT -Standard

• 0.01 - 20 Torr (100 - 20,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-4D Thermocouple vacuum gauge tubes

建議搭配儀器:

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-20 vacuum sensor 真空感測管

2011-08-09T00:35:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: Glass 3/8" OD

• 0.001 - 1 Torr (1 - 1,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-20 Thermocouple vacuum gauge tubes

建議搭配儀器:

Digital VT-6

Digital CVT

VT-6A

HPM 4/6

Digital-AVC

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-36 vacuum sensor 真空感測管 (真空計、真空感測器、真空儀器)

2011-08-09T00:34:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: Stainless (high temp/pressure)

• 0.001 - 1 Torr (1 - 1,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-36 Thermocouple vacuum gauge tubes

建議搭配儀器:

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-6R-CF vacuum sensor 真空感測管 (真空計、真空感測器、真空儀器)

2011-08-09T00:32:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: Mini-CF

• 0.001 - 1 Torr (1 - 1,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-6R-CF Thermocouple vacuum gauge tubes

建議搭配儀器:

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-6-KF-25 vacuum sensor 真空感測管 (真空計、真空感測器、真空儀器)

2011-08-09T00:29:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: KF-25

• 0.001 - 1 Torr (1 - 1,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-6-KF-25 Thermocouple vacuum gauge tubes

建議搭配儀器:

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-6-KF-16 vacuum sensor 真空感測管 (真空計、真空感測器、真空儀器)

2011-08-09T00:28:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: KF-16

• 0.001 - 1 Torr (1 - 1,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-6-KF-16 Thermocouple vacuum gauge tubes

建議搭配儀器:

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-6-VCR vacuum sensor 真空感測管 (真空計、真空感測器、真空儀器)

2011-08-09T00:27:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: VCR

• 0.001 - 1 Torr (1 - 1,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-6-VCR Thermocouple vacuum gauge tubes

建議搭配儀器:

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-6R vacuum sensor 真空感測管 (真空計、真空感測器、真空儀器)

2011-08-09T00:26:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: 1/8" NPT -Ruggedized

• 0.001 - 1 Torr (1 - 1,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-6R Thermocouple vacuum gauge tubes

建議搭配儀器:

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-6M vacuum sensor 真空感測管 (真空計、真空感測器、真空儀器)

2011-08-09T00:20:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: 1/8" NPT -Standard

• 0.001 - 1 Torr (1 - 1,000 mTorr)

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-6M Thermocouple vacuum gauge tubes

建議搭配儀器:

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-5M-VCR vacuum sensor 真空感測管

2011-08-09T00:17:00.000-07:00

Thermocouple vacuum sensor :

• Fitting: VCR

• 0.1 Torr-0.0001 Torr

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-5Thermocouple vacuum gauge tubes

VT-5

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

HPM-2002-S 真空計、數位式真空儀器

2011-08-09T00:04:00.000-07:00

2002 Vacuum gauge tube:
• Dual Sensor - pirani and peizo vacuum sensor
• Analog & Digital Outputs

• 1000 Torr-0.00001 Torr vacuum sensor

HPM-2002S-01 1/8" NPT (STD)
HPM-2002S-02- 1/4" VCR
HPM-2002S-03- 1.33 Conflat Flange
HPM-2002S-04- 2.75 Conflat Flange
HPM-2002S-05-KF-16
HPM-2002S-06-KF-25
HPM-2002S-07- 1/2" OD Smooth Tube
HPM-2002S-08- 1/2" VCR

HPM-2002-S Vacuum gauge tube

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

HPM-2002-OBE 真空計、真空感測器、真空儀器

2011-08-08T23:55:00.000-07:00

2002 Series:

• Dual Sensor - pirani and peizo vacuum sensor
• Analog & Digital Outputs

• 1000 Torr-0.00001 Torr vacuum sensor

型錄:http://www.teledyne-hi.com/pdfs/PB-153_HPM-2002-OBE.pdf

使用者手冊:http://www.teledyne-hi.com/Manual/Vacuum/149-HPM-2002_Manual.pdf

HPM-2000-OBE

HPM-2002-S Vacuum gauge tube

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

HFM-D-305 氣體流量計

2011-08-08T23:54:00.000-07:00

HFM-D-305

Flow Range: 0-1000 slm to 0-3,000 slm

質量流量技術提供更可靠，可重複和精確的氣體流量的測量相比，體積的方法，如rotometers和渦輪米。質量流量測量使用密度的氣體質量流量轉換單位（公斤或磅）的單位體積方面的熟悉（升/分）。然而，仍有大量的測量單位（我們稱這些單位的標準升/分鐘（SLM）），它們不隨溫度和壓力的變化。我們這樣做是通過引用只有一個，特定的溫度和一個特定的壓力（STP）。

300 - D系列質量流量儀表有流量範圍從 0-5 sccm至0-3,000可持續土地管理，使用全金屬密封件，提供模擬輸出，並建造不銹鋼。質量流量控制器有常閉閥。腐蝕性氣體，與異常的鹵素，壓力高達 1000 psig（可選）很容易測量。

自診斷功能的傳感器，閥門和溢流都包含在數字功能。此外感興趣的是汽車零檢測功能，當閥門關閉，並自動復位為零。這些質量流量計和控制器可存儲多達 10個不同的範圍和校準氣體。當監視不同的氣體在同一水平的幅度，（流量，分子量）本儀器是經濟優勢和更有效的在改變氣體。另一個特點是內置在累積監測燃氣使用用戶設置的條件下。

±（0.5％讀數 + 0.2％滿量程）精度為 3000 SLM

Features
• +/- (0.5% of reading + 0.2% of Full Scale)
for 0 - 2,500 slm
• Proven Reliability
• Range 5 sccm to 3,000 slm(N₂ Equivalent)
• NIST Traceable Calibration
• Built in Totalizer
• Automatic Zeroing

Accessories For Meters And Controllers
Power^Pod Models 40, 100, & 400
Cables
Flow Service Plan

Applications
• University Research
• Leak Testing
• Vapor Deposition
• Pharmaceutical Processes
• R&D And Process Flows
• Semiconductor Processes
• Gas Blending
• Thermal Flame Spray
• Applications where Acc critical vacu's

型錄下載：http://www.teledyne-hi.com/pdfs/PB-168_HFM-D-301,303,305,307.pdf
使用者手冊：http://www.teledyne-hi.com/Manual/Flow/163-%20HFM-D-301_305-HFC-D-303_307_Manual.pdf

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

Teledyne Hasting 台灣區代理商-系泰機電有限公司

HFM-D-301 氣體流量計

2011-08-08T23:52:00.000-07:00

HFM-D-301

Flow Range: 0-25 slm to 0-1000 slm

±（0.5％讀數 + 0.2％滿量程）精度為 3000 SLM

Accessories For Meters And Controllers
Power^Pod Models 40, 100, & 400
Cables
Flow Service Plan

HFC-D-307 氣體流量控制器

2011-08-08T23:47:00.000-07:00

HFC-D-307

Flow Range: 0-1000 slm to 0-3,000 slm

±（0.5％讀數 + 0.2％滿量程）精度為 3000 SLM

Accessories For Meters And Controllers
Power^Pod Models 40, 100, & 400
Cables
Flow Service Plan

HFC-D-303 氣體流量控制器

2011-08-08T23:45:00.000-07:00

HFC-D-303

Flow Range: 0-25 slm to 0-1000 slm

±（0.5％讀數 + 0.2％滿量程）精度為 3000 SLM

Accessories For Meters And Controllers
Power^Pod Models 40, 100, & 400
Cables
Flow Service Plan

HFC-D-302 氣體流量控制器

2011-08-08T23:41:00.000-07:00

HFC-D-302

質量流量技術提供更可靠，可重複和精確的氣體流量的測量相比，體積的方法，如rotometers和渦輪米。質量流量測量使用密度的氣體質量流量轉換單位（公斤或磅）的單位體積方面的熟悉（升/分）。然而，仍有大量的測量單位（我們稱這些單位的標準升/分鐘（SLM）），它們不隨溫度和壓力的變化。我們這樣做是通過引用只有一個，特定的溫度和一個特定的壓力（STP）。
300 - D系列質量流量儀表有流量範圍從 0-5 sccm至0-3,000可持續土地管理，使用全金屬密封件，提供模擬輸出，並建造不銹鋼。質量流量控制器有常閉閥。腐蝕性氣體，與異常的鹵素，壓力高達 1000 psig（可選）很容易測量。
自診斷功能的傳感器，閥門和溢流都包含在數字功能。此外感興趣的是汽車零檢測功能，當閥門關閉，並自動復位為零。這些質量流量計和控制器可存儲多達 10個不同的範圍和校準氣體。當監視不同的氣體在同一水平的幅度，（流量，分子量）本儀器是經濟優勢和更有效的在改變氣體。另一個特點是內置在累積監測燃氣使用用戶設置的條件下。
±（0.5％讀數 + 0.2％滿量程）精度為 3000 SLM
Features
• +/- (0.5% of reading + 0.2% of Full Scale)
for 0 - 2,500 slm
• Proven Reliability
• Range 5 sccm to 3,000 slm(N₂ Equivalent)
• NIST Traceable Calibration
• Built in Totalizer
• Automatic Zeroing
Accessories For Meters And Controllers
Power^Pod Models 40, 100, & 400
Cables
Flow Service Plan
Applications
• University Research
• Leak Testing
• Vapor Deposition
• Pharmaceutical Processes
• R&D And Process Flows
• Semiconductor Processes
• Gas Blending
• Thermal Flame Spray
• Applications where Acc critical vacu's

型錄下載：http://www.teledyne-hi.com/pdfs/PB-167%20rev-0809_HFM-D-300_HFC-D-302.pdf
使用者手冊：http://www.teledyne-hi.com/Manual/Flow/157-HFM-D-300_HFC-D-302_Manual.pdf

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

Teledyne Hasting 台灣區代理商-系泰機電有限公司

THPS-400 流量計顯示器 / 控制器 / 電源供應器

2008-10-29T01:58:00.000-07:00

Power^Pods

Power Supply and Display Module for Mass Flow Meter and Controller

1 channel and 4 channel versions available
RS232 interface
0-5 or 0-10 Volt input
Built in Totalizer

型錄下載：http://www.teledyne-hi.com/pdfs/PB-166_THPS-400.pdf
使用者手冊：http://www.teledyne-hi.com/pdfs/PB-166_THPS-400.pdf

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

Teledyne Hasting 台灣區代理商-系泰機電有限公司

氣體流量計-Industrial 400系列

2008-10-29T01:53:00.000-07:00

Industrial 400 Series Mass Flow Meters

工業型氣體流量計

HFM-I-401, 0-10slm to 0-350slm

HFM-I-405, 0-100 slm to 0-2500 slm

NEW - Industrial Mass Flowmeter
Flow ranges from 0-10 slm to 0-2,500 slm

High accuracy
Digital and analog outputs
Multi-gas calibration
Totalizer
Use in Hazardous Locations
Ethernet Option

型錄下載：http://www.teledyne-hi.com/pdfs/PB-170_400Series.pdf
使用者手冊：http://www.teledyne-hi.com/Manual/Flow/171-HFM-I-401_405_Manual.pdf

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

Teledyne Hasting 台灣區代理商-系泰機電有限公司

HFM-D-300 氣體流量計

2008-10-29T01:49:00.000-07:00

HFM-D-300

±（0.5％讀數 + 0.2％滿量程）精度為 3000 SLM

Accessories For Meters And Controllers
Power^Pod Models 40, 100, & 400
Cables
Flow Service Plan

型錄下載：http://www.teledyne-hi.com/pdfs/PB-167%20rev-0809_HFM-D-300_HFC-D-302.pdf
使用者手冊：http://www.teledyne-hi.com/Manual/Flow/157-HFM-D-300_HFC-D-302_Manual.pdf

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

Teledyne Hasting 台灣區代理商-系泰機電有限公司

氣體流量計-300系列

2008-10-29T01:45:00.000-07:00

300 Series Mass Flow Meter & Controller
泛用型氣體流量計與氣體流量控制器

範圍　0-5 sccm to 8,000 slm

All Metal Seals on selected models
Analog Output
Stainless Steel Construction
Controllers with normally closed valve

型錄下載：http://www.teledyne-hi.com/products/300-series.htm
使用者手冊：http://www.teledyne-hi.com/Manual/manuals.htm

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

Teledyne Hasting 台灣區代理商-系泰機電有限公司

氣體流量計-200系列

2008-10-29T01:36:00.000-07:00

200 Series Mass Flow Meter & Controller
泛用型氣體流量計與氣體流量控制器

範圍　0-10 sccm to 0-500 slm

Large flows to 15,000 slm with Laminar flow element
Elastomeric Seals
Analog Output
Stainless Steel Construction
Controllers with normally closed valve

型錄下載：http://www.teledyne-hi.com/products/200-series.htm
使用者手冊：http://www.teledyne-hi.com/Manual/manuals.htm

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

Teledyne Hasting 台灣區代理商-系泰機電有限公司

HPM 2002 真空計、真空感測器、真空儀器

2008-01-29T00:18:00.001-08:00

2002 Series:
• Dual Sensor - pirani and peizo vacuum sensor
• Analog & Digital Outputs

• 1000 Torr-0.00001 Torr vacuum sensor

型錄:http://www.teledyne-hi.com/pdfs/PB-143_HPM-2002.pdf

使用者手冊:http://www.teledyne-hi.com/Manual/Vacuum/149-HPM-2002_Manual.pdf

HPM2000

HPM-2002-S Vacuum gauge tube

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

DV-5M vacuum sensor 真空感測管

2008-01-29T00:16:00.001-08:00

Thermocouple vacuum sensor :

• Fitting: 1/8" NPT -Standard

• 0.1 Torr-0.0001 Torr

型錄:http://www.teledyne-hi.com/pdfs/PB-105_Thermocouple-Gauge-Tubes.pdf

DV-5Thermocouple vacuum gauge tubes

VT-5

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

VT-4A 真空顯示器

2008-01-29T00:16:00.000-08:00

VT-4 Series

真空範圍: 0.1 Torr - 20 Torr (100 - 20,000 m Torr)

型錄下載: http://www.teledyne-hi.com/pdfs/PB-101_VT_CVT.pdf

使用者手冊: http://www.teledyne-hi.com/Manual/Vacuum/146-VT_CVT_Manual.pdf

Vacuum Measurement with VT-4 Series Instruments using DV - 4 Vacuum Sensors

Specifications	Models VT-4A Series Analog Gauges	Model VT-4 Series Digital Gauge	Model Digital CVT-4	Model Digital AVC DAVC-4	Model HPM 4/6 Battery Hand held

View Product Bulletins for Ordering Codes	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page	Find Ordering Codes on last page
Manuals	VT-4A	Digital VT	Digital CVT	Digital AVC	HPM 4/6
Drawings	VT-4B	-	-	-	-
Thermocouple Sensor	DV-4	DV-4 Also uses DV-6	DV-4 Also uses DV-6	DV-4 Also uses DV-5 or DV-6	DV-4 Also uses DV-6
Reference Tube for Calibrating Meter	DB-16D	DB-16D	DB-16D	DB-16D	DB-16D
Vacuum Range	0.1 - 20 Torr (100-20,000 mTorr)	0.02 - 20 Torr (20-20,000 mTorr)	0.02 - 20 Torr (20 - 20,000 mTorr)	0.02 - 20 Torr	0.1 - 20 Torr (100-20,000 mTorr)
Display	Reverse motion analog needle	3 digit LED	3 Digit LED	No display	3 1/2 Digit LCD
Units	Torr mbar Pa	Torr	Torr mbar Pa	-	Torr mbar
Model Number	(Choose below)	DVT-4	DCVT-4	DAVC-4	HPM 4/6
Panel Mount	Model VT-4A	Digital VT	-	-	-
Panel Cutout Size	W- 5.0" H- 4.19" D- 3.75"	1/8" DIN W- 3.62" H- 1.77"	1/8" DIN W- 3.62" H- 1.77"	-	-
Enclosed Box (Cabinet) with on/off Switch	Model VT-4B	-	-	-	-
Output	Model VT-4A 0-1 Volt	-	-	0-1 Volt	-
2 Control Points	Model CVT-24A Relay 5 amps SPDT @250 VAC	-	-	-	-
Enclosed Box (Cabinet) with 2 Positions	Model VT-4S2	-	-	-	-
Enclosed Box (Cabinet) with 5 Positions	Model VT-4S5 Note:cables not included on this model	-	-	-	-
Circuit, Can, Cable only	Model VT-4D	-	-	-	-
Electrical Noise Immunity	-	ENC 61010 Class A and IEC 61326-1:Section 6.2 Complies with IEC 61010-1	-	-	-
Power	115 VAC (50-60 Hz) 220 VAC 100 VAC (Japan)	100-240 VAC-50-60 Hz, 0.25 amps 4.5-5.3 VDC -155mA	90 - 250 VAC-50-60 Hz, X.XX amps or 24 VDC	+12 - +30 VDC @.7 watt	9 volt battery
Power Cable Length	6 feet	6 feet	-	-	-
Vacuum sensor Cable Length	8 feet (others available)	8 feet (others available)	-	Not needed	13" (coiled length)
Weight (approx)	2-5 lbs (0.9-2.5 kg) dependent on model	7 oz (0.2 kg)	7 oz (0.2 kg)	22 oz (624 grams )	1.8 lbs (0.8 kg)

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

1 Torr-0.001 Torr vacuum sensor 真空傳感器

2008-01-29T00:12:00.000-08:00

Thermocouple vacuum sensor :

• The original DV-6 gauge tube

• Analog output available

DV-6Thermocouple vacuum gauge tubes

VT-6

Digital VT-6

HPM 4/6

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

20 Torr-0.1 Torr vacuum sensor 真空傳感器

2008-01-28T23:57:00.000-08:00

Thermocouple vacuum sensor :

• The original DV-4 gauge tube

• Analog output available

DV-4Thermocouple vacuum gauge tubes

VT-4

Digital VT-4

HPM 4/6

Email us: sales@accusystech.com
Website: http://www.accusystech.com/

1000 Torr- 0.1 Torr vacuum sensor 真空傳感器

2008-01-28T23:42:00.000-08:00

760 S Vacuum Sensor

760 PlusVacuum Meter

Piezo Vacuum (sensors) and Gauges (vacuum meters) THPS 760 and THPS 760 S

Features

• Proven Reliability

• Range 0.1 - 1000 Torr

• Accurate Linear Analog Outputs

• Four analog output types to choose

Applications

• Automotive

• Corrosive Environments

• Mixed gaseous atmospheres

ModelHPM 760 S 產品型錄下載 (PDF)

ModelHPS 760Display and ElectronicsS 產品型錄下載 (PDF)

Email us: sales@accusystech.com

Website: http://www.accusystech.com/

TT9000 扭力測試-無線傳輸

2008-01-28T19:02:00.000-08:00

TT9000 扭力無線傳輸

Transmit Live Torque Data from a Rotating Shaft
The TorqueTrak 9000 Digital Radio Telemetry System converts virtually any drive shaft into a rotating torque sensor. The miniature battery-powered transmitter rides on the shaft and broadcasts digital data from a torque-sensitive strain gage. Simple and easy to install the microprocessor-based system provides accurate and reliable torque data in real time during actual machine operation.

產品特色:

安裝容易 Fits any size shaft. No machine modifications or disassembly required.
使用方便 Wire up strain sensor and start transmitting torque data. Calibration is done off-the-shaft.
數位資料傳輸採集 Delivers a clean, noise-free data signal.
八頻道設計 Use multiple systems simultaneously without signal interference or crosstalk.
七種增益範圍 Amplify the strain/torque signal to the most useful level.
自動歸零 Toggle Switch Cancels out any null offset voltage and automatically sets the Zero reference.

更多資訊下載

　
產品型錄下載 (PDF)
使用者操作手冊 (PDF)

TorqueTrak Revolution 扭力測試-無線傳輸

2008-01-28T18:56:00.000-08:00

TorqueTrak Revolution 扭力無線傳輸

Continuous Torque and Power (HP or KW) Data from a Rotating Shaft
The TorqueTrak Revolution Series is a torque and power monitoring and control system that features inductive (non-contact) power and data transfer for continuous operation. Designed for applications that require ongoing measurement of torque and/or horsepower the TorqueTrak Revolution system is custom-machined to install on existing shafting up to 40 inches (1016 mm) in diameter. Machine disassembly is not required. The microprocessor-based system features 14-bit signal processing to provide precise, reliable data in real time during actual machine operation.

Four independent output signals are standard:
Torque: 12 ± 8 mA, scalable
Power: 12 ± 8 mA, scalable
Shaft Speed/RPM: Frequency-based pulse indicator, mA
Shaft Direction: Binary indicator, mA

產品特色:

安裝簡單 Rotating Collar and stationary Power Ring are split and bolt together around the shaft. Shaft modification is not required.
校正方便 Use at factory settings or utilize easy scaling and adjustment tools. No tuning required.
可靠度高 Inductive power and data transfer with generous clearance between stationary and rotating parts. No wear surfaces.
數位資料傳輸採集 Delivers a clean, noise-free data signal with 14-bit resolution.
堅固耐用 Sturdy hardware and electronics, built for demanding environmental conditions.
智慧型設計 System status indicators confirm proper operation and aid in troubleshooting.
產品技術支援 Backed by BEI's proven outstanding customer service, before and after the sale.

更多資訊下載
產品型錄下載 (PDF)
使用者操作手冊 (PDF)

TorqueTrak 10K 扭力測試-無線傳輸

2008-01-28T18:47:00.000-08:00

TorqueTrak 10K 扭力無線傳輸

Transmit Live Torque Data from a Rotating Shaft
Measuring live torque in real time is easier than ever with the new TorqueTrak 10K telemetry system. Convert virtually any drive shaft into a rotating torque sensor by simply mounting the transmitter, battery and a torque sensitive strain gage to the shaft.
Use the infrared remote control to adjust transmitter gain, activate the remote shunt calibration or switch the transmitter to standby power mode. The multi-line LCD receiver display and keypad make system adjustments straightforward. Low power consumption in the rugged transmitter allows longer battery life while sophisticated electronics assure accurate and reliable torque data output.

產品特色:

使用簡單 Fits any size shaft, any torque level. No machine modifications or disassembly required. Calibration is done off-the-shaft. Receiver display and keypad offer user-friendly interface
遠端遙控 Control transmitter operation including channel select, gain/range, shunt calibration and low-power standby mode
絕佳的資料傳輸 Clean, noise-free data signal through analog voltage output or digital data output via RS-232
智慧型電力系統 Extends transmitter battery life without disconnecting battery
16 頻道, 500 Hz 頻率響應 Use multiple systems simultaneously
堅固 Reinforced, injection-molded transmitter housing is built for demanding applications and features V-groove and tape slot for secure mounting
可調整式增益放大功能 Amplify the strain/torque signal to the most useful level
附贈攜帶箱 Convenient carrying case provides rugged, watertight protection
　
更多資訊下載

　
產品型錄下載 (PDF)
使用者操作手冊 (PDF)
　

扭力計應用實例-瓶罐裝配扭力

2007-10-25T01:59:00.000-07:00

Torque Sensor Application - Assembly Line / Automation

Sensors / transducers are essential in many automated assembly, packaging and labeling processes. Below, a reaction torque sensor is setup with a servo motor in an automated conveyor belt assembly line to control the tension in the winding tape while providing feedback regarding alignment, out of roll signal and other required alarms. The torque signal can also be monitored via a control computer from a central location for required preventive maintenance and upkeep.

Email us: sales@accusystech.com
Website: www.accusystech.com

扭力計應用實例-手腕扭力

2007-10-25T01:58:00.001-07:00

Torque Sensor Application - Prosthetic Limbs

Sensors and transducers have been very instrumental in the development of prosthetic devices. They allow prosthetic devices to closely mimic human limbs. In the example below, a smart/digital torque transducer in line with a stepper motor is providing torque & position feedback to an electronic feedback controller/wireless device. This feedback mechanism allows the person to have normal arm movements with control. Similar systems can also be setup within the knee to provide extra stability and automatically adjust and guide the knee. These advancements allow a person to go about his/her daily life without any interruptions.

Email us: sales@accusystech.com
Website: www.accusystech.com

扭力計應用實例-馬達扭力測試

2007-10-25T01:56:00.000-07:00

Torque Sensor Application - Rotating Torque Monitoring System

Inline Rotary Torque Sensors / Transducers are normally used in line with rotating shafts or nut runners for feed back control. For optimum performance, it is recommended to utilize coupling in order to minimize extraneous load & moments due to misalignment. When selecting the torque sensor, make sure to specify required RPM for proper sensor and related instrument selection. FUTEK’s line of rotary torque sensors are strain gage type and are available with booth Slip ring type (300 series) with mV/V output or non-contact ones (600 series) with +/- 5VDC output. Both versions are also available with an encoder with "TTL" output for Speed or angle measurement. They are available in standard capacities starting from 0.5 NM to 1000 NM.

Email us: sales@accusystech.com
Website: www.accusystech.com

扭力計應用實例-泵浦

2007-10-25T01:54:00.000-07:00

Torque Sensor Application - Constant Flow Pump

In the constant flow pump, a stepping / stepper motor is used to create a pumping function and allow fluid to flow. A reaction torque sensor attached to the back end of the motor monitors the required torque and can relate the changes in torque to the flow rate or alarm the operator when the torque falls outside of its expected window or malfunctions. Using the torque feed back improves the efficiency of the pump and elongates its life.

Email us: sales@accusystech.com
Website: www.accusystech.com

扭力計應用實例-低扭力測試

2007-10-25T01:42:00.000-07:00

Torque Sensor Application - Low Capacity

The typical application of these products include measurements dynamometers, tool dulling indicator, motor quality control or conversion of rotary to reaction torque.

Email us: sales@accusystech.com
Website: www.accusystech.com

扭力計應用實例-扭力起子測試

2007-10-25T01:40:00.000-07:00

荷重元應用實例-油壓伺服裝置

2007-10-25T01:35:00.000-07:00

Different types of sensors / transducers can be used simultaneously in order to improve quality during manufacturing or production processes. Below, a torque sensor attached to a motor at the top of a stamping operation monitors the amount of torque being exerted in order to stamp the cap on top of the bottle. The load cell at the bottom is used as a quality measure. It monitors the applied forces to detect and prevent excessive force due to misalignment or other causes. If the torque or load displayed falls outside an acceptable window, the operator will be alarmed to make some adjustments in order to ensure the final product is not defective.

Email us: sales@accusystech.com
Website: www.accusystech.com

荷重元應用實例-車門測試

2007-10-25T01:33:00.000-07:00

In this particular application, a car door is being tested. This test can be used to determine whether or not the door could function for a certain time period, or how long it will last before it fails. It works by using the hydraulic / pneumatic actuator to open and close the door within a given amount of time. The force that it uses to open and close the door is controlled by the load cell. This information is then recorded and analyzed for further assessment. There are many applications for load cells in the automotive industry. Feel free to contact us for further assistance.

Email us: sales@accusystech.com
Website: www.accusystech.com

荷重元應用實例-汽車生產線組裝

2007-10-25T00:39:00.000-07:00

Below is a common assembly line lineup. It is a conveyor based assembly line where a piece of sheet metal is traveling through several operations. The first step is the stamping / punching station in which the specified load is being monitored. When the tool gets dull, the load gets out of its accepted range and notifies the user that its time to change the tool.

Next, in the tapping station, the tool is monitored by measuring an accepted torque / force range. In both cases the information can be provided in digital format and sent to a SPC (statistical process control) for further analysis.

Email us: sales@accusystech.com
Website: www.accusystech.com

荷重元應用實例-Viscosity / Liquid Separation

2007-10-25T00:38:00.001-07:00

This particular application is used in batching or mixing of multiple chemicals. By measuring the viscosity, you can determine when to stop adding a liquid to the mix. As shown here, the table can be lifted so that the probe reaches the liquid in the tank. The probe can also be brought down into the liquid. Once the probe is in the liquid, a certain amount of tension is required to pull the probe back out. The thicker the liquid, the higher the viscosity is and the harder it is to pull the probe out. The load cell measures this tension and transfers the data to a display. Both MIT and NASA (Glen Research Center Cleveland) have utilized Futek’s Sensitive Dyne Sensor to measure water or liquid separation forces.

Email us: sales@accusystech.com
Website: www.accusystech.com

荷重元應用實例-鞋底無線傳輸

2007-10-25T00:36:00.000-07:00

Wire and wireless force sensors / load cells can now be used as an everyday accessory for consumer use. They are used in shoes in combination with an MP3 player to measure your activity and transfer data to a receiver which then displays the information on the MP3 screen. The sensor tracks motion, distance, and other necessary metrics for the active individual and easily fits into a specially designed shoe.

The sensor can also help to correct a person’s posture. It is designed so that the MP3 connection would weaken when a person does not walk / run correctly. This motivates the user to walk / run correctly in order to listen to the music without static interruption. Futek has used our load button load cell to assist universities in developing this program and can assist other research programs in fulfilling such projects.

Email us: sales@accusystech.com
Website: www.accusystech.com

荷重元應用實例-Closed Loop Feedback

2007-10-25T00:27:00.000-07:00

The diagram below is a good example of closed loop feed back operation. It shows how donut / thru hole load cells and pancake load cells can be used in insertion / press applications for precision assembly during the manufacturing process. The donut / thru hole at the top monitors the required load while the pancake load cell at the bottom checks and verifies the actual load being applied in order to control alignment for smooth insertion.

Email us: sales@accusystech.com
Website: www.accusystech.com

荷重元應用實例-Tank / Silo

2007-10-25T00:26:00.001-07:00

Load cells can be placed on the legs of a silo or tank in order to monitor how full it is. When more than one load cell is used, a junction box is needed to average the load of all the load cells and provide one output which can then be connected to a computer or plc using a signal conditioner or digital display to show the output. The system can be automated so an alarm will sound once the tank reaches a certain level. It can notify someone via email when the tank is full, empty, or at whatever level the system is set at. The application can also be setup to trigger another tank to fill it when it reaches a given point. The way it notifies a user can vary, but the overall application is the same.

Email us: sales@accusystech.com
Website: www.accusystech.com

荷重元應用實例-橋樑鋼纜拉力

2007-10-25T00:24:00.000-07:00

FUTEK load cell and instruments can be used in suspension bridges. Our load cells can be installed on the cables to measure the tension and stress applied to the cables under various traffic conditions. They can also be installed under the post of the bridge to measure the compression the bridge experiences under various conditions. Data acquired will be sent to a data logger or data acquisition system using FUTEK Junction Box and related instrument. Remote management of data via internet or cell phones can be achieved.

Email us: sales@accusystech.com
Website: www.accusystech.com

荷重元應用實例-Bag Filling Machine

2007-10-25T00:22:00.000-07:00

FUTEK load cell system can be used in an automated assembly-line bag filling application. As shown the upper conveyor loads parts into a hanging container. The container is connected to a load cell. The load cell monitors the weight of the container, once it reaches the preset weight the upper conveyor stops or slows down and the container gate is released to feed the bags on the lower conveyor. Then it closed the gate and will restart the upper conveyor for filling process again. FUTEK instruments can control both gates & the conveyor using 2 separate alarm set points or analog output and plc or computer system.

Email us: sales@accusystech.com
Website: www.accusystech.com

荷重元應用實例-風力發電

2007-10-25T00:21:00.001-07:00

Email us: sales@accusystech.com
Website: www.accusystech.com

荷重元應用實例-填裝分配應用(二)

2007-10-25T00:19:00.000-07:00

Email us: sales@accusystech.com
Website: www.accusystech.com